Landola "Higher End" guitar / Strunal guitar Model 977

Het label ontbrak aan deze gitaar maar U kan er

altijd een afdrukken aan de hand van door mij

geleverde foto's. Type helaas onbekend maar de 

inscriptie in het hielblok: Made in Finland maakt

e.e.a. weer duidelijk. Landola dus. SOLD.

Een higher end gitaar waarvan de rozet en de brug inleg

getuige is. Eerlijke materialen (massief bovenblad) en

met een prettige bespeelbaarheid. Landola leverde ook

gitaren aan de Levin firma. Blijkt dus niet alleen in

Spanje gebruikelijk te zijn.

De onderkant van de gitaar is ook nog eens met zorg ingelegd.

Het gebruik van cellulose lakken laat zich hier goed zien.

Na verloop van tijd zijn de onvermijdelijke haarscheurtjes

in de lak te zien. Je treft dit ook vaak aan bij de oudere

Gibson gitaren. Oude lak kristalliseert als het ware uit, 

wordt keihard maar toch gemakkelijk te verwijderen.

In afwijking van wat vele Spaanse gitaren niet  hebben is hier

wel een halspen in de hals aangebracht. Dus altijd bij te stellen!

En een centrale sierstrip.

Op een luxere gitaren horen ook luxere mechanieken 

met geklonken ashouders voor de worm.

Verstevigingsstrip voor de hals en ook hier weer 

een inleg tussen de twee delen van het achterblad.

Ebben afdekplaatje voor de hals.

En ook de achterkant van de gitaarkop ziet 

er nog netjes uit.

Gezien zijn leeftijd (Wellicht jaren zestig) weer 

behoorlijk in de lak en goed voor jaren speelplezier.

Een redelijk bijzondere vondst: 

Een higher end Landola gitaar

Wat shots van de zijbladen.

Palissander op palissander gelamineerd. Maakt in feite

de zijkanten veel stabieler dan massief hout. Jose

Ramirez paste deze techniek eigenlijk ook toe op

zijn concert gitaren maar daarnaast ook veel 19e

eeuwse gitaarbouwers in Mirecourt (Frankrijk)

Het afdekplaatje voor de halspen en de centrale

versierings inleg zoals deze ook op de achterkant

van de gitaar te vinden is.

De wat bredere maar ook diepere klankkast zorgt 

voor een mooi en rijk laag. De balans tussen hoog 

en laag is ook dik in orde.

De vernis wat losgesprongen maar deze plaats is ook

van wat extra aandacht voorzien. Lijm ingewerkt.

De diverse labels die Landola voerde. Toch lastig om er wat

meer over terug te vinden al zijn ze ook in de USA geimporteerd

onder de merknaam "Espana" dus niet onder de naam Landola.

De koper heeft de keuze tussen de verschillende labels...

Strunal guitar model 977.

Strunal guitar from the Czech Republic model 977.

Equipped with a solid soundboard and an easy

playable 645 mm Scale length. Worth of the topnut

is 51 mm. In fact a mint example of this company.

Free from any damage or scratches. You can 

enlarge this picture by clicking on it.

All in all a tropical wood for back and sides

but I can't really tell you what type of wood

has been used here.

Juan Estruch "Concierto Uno" plm. 1965

This is a yellow label Concierto I from 1972 as the label 

states. It suffered from some humidity problems but 

luckily only concerning the lacquer. A lot of time

consuming work but the guitar is in a like new condition

 now. You can take a look here what has happened during

this process of restauration. SOLD

The multi coloured inlays are typical for the Concierto

series guitars, also on the back here. As the moisture came 

under the poly urethane lacquer which was original it

caused some nasty spots so removing the old lacquer

was a must.

New frets and shaving off the fingerboard towards the head

was a must as the angle neck / body wasn't good anymore.

Of course a new topnut and cleaning of the tuners. This 

neck / body angle issue can be found on a lot of older 

classical guitars, even Jose Ramirez concert guitars!

The head itself was in fact in a good condition.

And no damages on the edges of the back of the head as well.

Even the booklet is still present with this guitar: 

Guaranteed and signed by Juan Estruch himself.

The sides were ugly as well and the top collected dirt

in the cracks. These cracks were only in the thick layer

of lacquer so after having removed this layer I was

able to start all over again and colour the guitar with a 

water based stain and finish it afterwards.

Good Fustero tuners that belong on a guitar like this.

Removing the lacquer from the top is a simpler process

with the bridge off. It came off already so I figured it to

be the best to provide it with a 12 hole bridge.

Nice materials are used for these higher grade guitars.

Union Musical Espanola (Editores ANTES CASA) Labelled Guitar

A bit odd to start with a label as this is not a luthiers' 

label to our believe but most likely a guitar and other

musical accessoires supplier who had these instruments 

built elsewhere. Union Musicales Espanola had their

shops in different Spanish cities. Price: € 1250,-

Not a well known headstock for me but some details might

point to a Barcelona based luthier: The Juan Estruch company.

Recently I stumbled onto a 1970 guitar with the same headstock.

About the age of this guitar one can conclude that the later

ugly polyurethane finish is not present on the soundboard 

but is there on the neck, sides and back.

In the lower left there is some damage on the back and

after a good night sleep I decided to make some inserts 

for the cracks there. As it has to be levelled afterwards

the back as a whole will be refinished.

The yellow, red and green bindings are typical for Estruch

so possibly another Juan Estruch model. Contact with the

Estruch company indeed learnt that we are dealing with

a genuine Juan Estruch, one of the oldest guitar companies

in Spain though there are no "Estruch" named luthiers

at work anymore in the factory nowadays. Another 

luthier most likely bought the name and went on.

Nice clean rollers and refreshed frets. Alass this guitar 

has to be refretted as the neck is showing a serious backbow

which I have never found on a classical guitar until now!

And the only way to make a proper correction is to treat

the fingerboard by shaving it. In a most worst case the

fingerboard could have been replaced after having lined

out the neck. Most of the time not necessary.

A nice rosette and a spruce soundboard that is "crack" free.

And a matching inlay in the string tie block.

Fustero tuners that are in good condition.

Some spots on the outer neckblock but nothing fundamental.

In fact the case might give an idea about the age of this

guitar. Anyway a lot to be investigated still but a start

has been made by judging its' sound: Someone hightened

the bridgebone by putting some paper under the bridge

bone. A disaster for a good sound. Moreover the bridge-

bone was broken but that has been solved already.

I don't know the brand of strings but to my opinion

this guitar will sound even better with Savarez Corum.

The volume it can provide is already there now!

Here the label on the inside of the case is presented.

Another typical move on the Concerto series of Estruch 

was the use of an ebony veneer layer on the outer heel.

And the multi coloured bindings of course. A short

E-mail contact between the Estruch company and me

confirmed my thoughts about the origin: Juan Estruch.

Manuel Romero Macias Handbuilt Flamenco guitar 1990 / Antonio Mateu Ramis guitar 1953

 

Close to the city of Sevilla Manuel Romero Macias and 

his son are building guitars in the traditional way. This

builder is merely focused on sound and his guitars are

really responsive, lightly built with a certain kind of 

percussive quality. Good balance and ease of playing.

He pays less attention to all the details in guitar-

building but nevertheless his instruments are worth

to go for. This example of a handbuilt flamenco guitar

is very nicely priced, due to some imperfections that

will be explained further on. Price: 750 Euro.

Macias uses premium grade materials of which my

classical model attests. You can take a look on youtube

to have a close listening to this classical model from

1995. He used Brasilian rosewood for sides and back

and mounted the top of the line damascening treated

Fustero tuners, a proces where a layer of gold is used

against the black metal base plates. The flamenco

guitars, Sevilla is known for, can be judged by listening

to the sound example on the site of Vintage guitar world.

They're selling there a 2005 Flamenco guitar executed

in maple in combination with a cedar top surprisingly.

But the price there is 1950 Euro's.

The way he shapes the heels for example is very gracefully.

Remarkable is the neck that exist of two halves seperated by an 

inlay all the way up to the head of the guitar. In order to make

it possible to mount thinner shaped necks which enhances

the playability.

The topnut has been changed as there is some

evidence of the sloppyness that can be found

here and there on his instruments. No big deal

however to have that properly done. Same thing

counts for the fret work and especially the fret

ends.Width topnut is 53 mm. Scale 650 mm.

Nice low action with enough bridgebone and this

is the "good"  side of this guitar.

His label stayed very simply during all the years he was active.

Now his son is in charge and still builts in Montellano.

A double "see through"  scratchplate and a

nice rosette. Ebony fingerboard in good shape.

One well repaired crack in the soundboard.

On the other side a roughly repaired crack is still visible.

And that is often the problem with cypress: It cracks

quite easily. But thoughts are that this guitar accidentely

fell on the floor, thus causing some damage. Well repaired

so it doesn't has any influence on the sound of the guitar 

but it certainly makes its' price more agreable! Here the

outer part of this side still has to be done.

In fact not even an insert in the lower bout as that wasn't needed.

Alass the discolouration is there but it does not influnence the

sound. The soundboard has a slight downward curve between 

bridge and soundhole. That has everything to do with the

fact that Romero Macias keeps his soundboards absolutely 

straight while with most luthiers the sounboard is slightly 

curved. That adds stability but also stiffness to the top and

that is something you do not want that much: You want 

the top to vibrate freely.

This is the formerly damaged side but it has been repaired in 

Spain in the past and is stable during the 10 years I owed this

guitar. I only did some cosmetic work on the outer part.

Not nice to look at but stable as has been stated. For 

cosmetical reasons one could have this side veneered.

A straight neck and fairly flat which enhances playability

to my believe. A thin layer of ebony for the fingerboard

in order not to make the neck too heavy.

Newly added tuners which work very well.

The strange move Manuel Romero always makes.

Two halves of wood for the neck up into the head.

Just click on this picture to be able to study it.

Ad the back which is in a very reasonable condition.

Some more information from Vintage guitar world:

Manuel Romero – a flamenco guitar with a huge punch and a great dynamic!

Manuel Romero Macias is a Sevilla based luthier. The workshop is in Montellana (near Sevilla).

His guitars fall into a special category. They are true hand made instruments, built by an old-school luthier using the finest materials. They possess a wonderful sound, and are very affordable. This guitar (2005 Flamenco model Vintage guitar world) has a cedar top and a maple body – a rare and spectacular combination. The scale length is 660 mm and the nut width 52 mm.

The tone of this particular instrument is sweet, beautiful and lyrical while retaining the bite and energy of flamenco: when playing melodically, it sings like a human voice, but also awakens with a tremendous bite when pushed hard. The strong, voice-like trebles are balanced by it’s big low-end that is full but not boomy. As sweet as the tone is, it still has the aggressive response when pushed in the right direction – rasguedos in particular are quite explosive and powerful.

The setup is very comfortable and the guitar plays with great ease. A great chance to get a high quality handmade guitar at an affordable price. USD 1950,-

Antonio Mateu Ramis

Antonio Mateu Ramis was a Barcelona based luthier.
Little can be found about his activities but a classical
guitar by this builder was highly praised by the famous 

Alexandre Lagoya. (Collection Sebastian Stenzel)
Very lightly built in the typical flamenco tradition.
Spruce top and ebony fingerboard.
A dry tone and quickly responding.

Apart from the nice Rosette you can see the double
scratchplates as is common on flamenco models.

On this label the luthier marked this instrument no. 13 being
dated the first of july 1953. In fact this luthier stopped in about 

1965. He had no successors. A classical guitar of this builder 

is in the possesion of Sebastian Stenzel . (no. 239 - 1961)

The back of this guitar wasn't free from cracks either

but the damage could be easily cured and finished.

On this guitar the use of cypress can be clearly seen.
This is still tradition in flamenco guitar building though
it is possible to order a "negro" flamenco model
that has been equipped with a rosewood back.
Ebony tuning pegs to lighten the guitar in fact

isn't the right solution but at the same time 

proof for a certain kind of quality.